Main Features

• Models from 2 to 12 channels
• 40 or 80 mm wide channels available
• Legendary Graphtec quality and reliability
• Plug-in signal amplifiers
• Bandwidth (frequency response): dc to 140 Hz
• Sprocket drive chart paper eliminates drift and skew
• High quality, low maintenance pen writing
• Selectable chart speeds
• Time marker along left chart edge

Models

• With 40mm wide channels:
  • WR3320-2 [2 channels]
  • WR3320-4 [4 channels]
  • WR3320-6 [6 channels]
  • WR3320-8 [8 channels]
  • WR3320-12 [12 channels]
• With 80mm wide channels
  • WR3320-1D [1 channel]
  • WR3320-2D [2 channels]
  • WR3320-3D [3 channels]
  • WR3320-4D [4 channels]
  • WR3320-6D [6 channels]

Options & Upgrades

• For 40mm wide channels
  • AL3301 Medium Gain Amp 5mV to 100V/cm
  • AH3301 Medium Gain Amp 1mV to 500V/cm
  • AS3301 Zero Suppression Amp 5mV to 20V/cm
• For 80mm wide channels
  • AL3302 Medium Gain Amp 2.5mV to 50V/cm
  • AH3302 Medium Gain Amp 1mV to 250V/cm
• Other Options
  • TC-01 IRIG time code interface
  • TC-02 NASA time code interface
  • A variety of options are available, including roll chart take-ups, shipping cases, additional event markers, and many more

How to Purchase

• Request a Demo
• Ballpark Price Info (use the same link as above to request this)

The WR3320 Linearcorder Mark VII is a thermal writing pen oscillograph which has been designed to meet the standards required by even the most exacting of professionals, including government agencies all over the world. This is a proud testament to their reliability and legendary performance.

The Linearcorder Mark VII is capable of recording high-speed phenomena of up to 140 Hz, and can therefore be used for a wide range of applications - from production sites to the laboratory. The WR3320 can be configured as a 1-, 2-, 3-, 4- or 6-channel recorder with an amplitude of 80 mm. per channel or as a 2-, 4-,6-, 8-, or 12-channel recorder with an amplitude of 40 mm. per channel. (40 and 80 mm. channels).

Continuous Recording Up to 200 Meters

Both roll and Z-fold paper can be used with the WR3320. 100 meter lengths stock inside the recorder, while an optional Z-fold chart supply box with a take-up tray enables the use of 200 meter lengths. Roll paper can be rewound simply by pressing the REWIND switch, and an automatic roll chart take-up unit is available as an option.

Multiple Remote Control Functions

Remote control functions such as pen heat on/off, chart feed start/stop, synchronization with an external pulse, output of paper-end signal, input of event marker signals, and input/output of time marker signals enable automated, unmanned operation.

1 V d.c. Reference Voltage Output

Rear panel reference voltage output connectors enable easy calibration whenever plug-in units have been exchanged. The reference voltage output used for calibration is 1 V d.c.

What's in a Name?
The WR3320 was previously referred to as the WR3310. This is the same instrument - only the name has changed slightly, to keep up with our continuous quality improvements.